HORN® provides several types of burners for different applications. For either regenerative cross fired or end fired furnaces HORN® offers two types of burners, depending on the heating medium the customers use. Further, recuperative fired furnaces as well as the glass distribution channel and forehearths can be equipped with the reliable HORN® burners. For the secure installation high quality burner brackets are available.
The HORN® DUALFLAME gas burner is installed as an underport-burner in regenerative cross fired or end fired furnaces. Its design enables the furnace operator to adjust the flame formation smoothly within a wide range – from short and sharp to long and soft.
The HORN® MOB burner for oil is installed as under-port burner in regenerative cross fired or end fired furnaces. Its design enables the furnace operator to adjust the flame formation in two ways: the dimension of the oil nozzle and the dimension of the air nozzle. The performance adjustment and flame adjustment are executed by means of the relevant nozzle drillings.
The HORN® industrial burner, type HCB, is a burner with an air casing containing a high temperature-resistant inner lining. Hereby the burner is damped against noise, becomes temperature resistant and is suitable for combustion air temperatures of up to max. 850 °C.
The burner angle has a strong influence on the melting process, the furnace life and the emission values. HORN® offers two different holder types for its burners: HORN® Burner Bracket H-BB and HORN® Rapid Adjust Bracket H-RAB.