Electrode holders serve to cool, guide and hold molybdenum electrodes installed in them. They thus protect the electrode from corrosion by the molten glass and from oxidation by ambient oxygen.
Electrode holders are designed for horizontal or vertical installation in the glass contact material of glass melting tanks and forehearths.
They consist of the water-cooled holder tube, a fixing for the electrode and a holder for electrically insulated installation to the furnace steel. The holder tube is designed for different lengths depending on the refractory structure.
They are electrically insulated and fixed to the furnace steel so that electrical power can be supplied to the glass melt by the installed molybdenum electrodes.
The top electrode – type furnace is used to heat glass melts from above through a cold batch layer. It is usually used to power the all electric furnaces (AEF).
The top electrode – type forehearth is a proven tool for direct energy input into feeders and forehearths with a covered glass surface.
Electrode holders serve to cool, guide and hold molybdenum electrodes installed in them. They thus protect the electrode from corrosion by the molten glass and from oxidation by ambient oxygen.
Do you have any questions? Then please do not hesitate to contact us.
Contact person: | Mr. Andreas Morstein |
Phone: | +49 9636 92 04 869 |
Fax: | +49 9636 92 04 871 |
E-Mail: | andreas.morstein(at)jsj.de |
We use cookies to make it easier to use and to further improve our service.
If you have given us your consent, you can revoke it at any time in the data protection declaration.